Switching On Efa 802 Unit - EFA 802 Betriebsanleitung

.
Water collector
with automatic
drain system
Figure 8: Recommended layout of the compressed air line and the workplaces

3.3 Switching on EFA 802 unit

Prior to switching on the power
knife, read the instructions in this
manual carefully and ensure that
the tool is properly connected.
Do not switch on the knife without
having assured yourself that the
blade is properly mounted and
secured!
1. To switch on the knife, hold it firmly in your
hands.
Figure 2: Power knife switched OFF
2. To switch on the knife, firmly press the
Schmid & Wezel
D75433 Maulbronn,
Gradient 1:100
Gradient 1:100
Water trap
Maintenance unit
Maintenance unit
switching lever down.
Figure 3:
3. If the switching level is operated hesitantly, the
power knife might not be started.
4. If the knife fails to start, repeat steps 1 and 2.
Page/ Seite
5/ 14
Water trap
Stop
valve
Tank
Drain valve
Cooler and dryer
Power knife switched ON
Version/ Ausführung
Compressor
08.2005