Klarstein Windwaker Eco Bedienungsanleitung Seite 76

EN
76
• In dry mode, the unit automatically runs in silent mode.
• In automatic mode, the unit runs in automatic silent mode according to the actual
cooling, heating or fan mode.
• This function is only available on some models.
WIFI Function
Press the WIFI key to activate or deactivate the WIFI function. When WIFI is enabled,
the remote control screen displays WIFI. When the remote control is off, press the MODE
and WIFI buttons simultaneously for one second to reset this function to the factory
settings.
Note: This function is only available on some models.
LIGHT - Turn light on/off
Press the LIGHT button to turn off the on-screen illumination of the indoor air conditioner.
The light bulb icon no longer appears on the remote control screen. If you press the
LIGHT button again, the unit's backlight will turn on again and the bulb icon will appear
on the remote control screen.
Health Mode and Cleaning Functions
• Press this button to activate and deactivate the health and cleaning functions of the
device in the operating status. Pressing this button once starts the cleaning function
and the remote control screen displays
• If you press this button again, the health and cleaning functions will run
simultaneously. The remote control screen displays
• If you press the button a third time, both functions will be cancelled.
• If you press the button a fourth time, the health function will start and the remote
control screen will display
• If you press the button again, the unit returns to step 1.
Note: This function is only available on some models.
.
and
.
.