Klarstein Windwaker Eco Bedienungsanleitung Seite 70

EN
70
• When you select the fan mode, only the fan is turned on and the unit does not
cool or heat additionally. All indicator lights, except the power indicator, are off.
You can adjust the fan speed by pressing the FAN key. By pressing one of the two
SWING buttons
• If you select the heating mode, the air conditioner runs in the heating mode. The
display appears on the indoor air conditioner screen (for some models, this
display may not be available). Use the ARROW KEYS to adjust the speed. Press
the FAN button to adjust the fan speed. You can adjust the swing angle by pressing
one of the two SWING buttons
cooling function does not receive the heating signal. If you set the heating mode,
the appliance cannot be switched on by pressing the POWER button.
Note: To prevent cold air from being blown out after the heating mode is started,
the unit will not blow any air for the first 1-5 minutes (this time depends on the indoor
ambient temperature).
FAN - Adjust Fan Speed
Press FAN repeatedly to select the speed you want: auto > low > low-medium > medium
> medium-high > high.
• In dry mode, only the low speed is available.
• X-FAN Function: If you press and hold the FAN button for two seconds in Cool
or Dry mode, the icon
to operate for a few minutes to dry the indoor air conditioner, even if you have
already turned it off. After drying, the function is automatically deactivated. This
function is not available in automatic, fan and heating mode. This function allows
liquid that has accumulated in the appliance after it has been switched off to be
blown out in the form of steam, thus preventing mould.
• Activated X-FAN function: After switching off the appliance by pressing the On/
Off button, the appliance continues to run at low speed for a few minutes. If you
want to turn off the unit completely at this time, press and hold the FAN button for 2
seconds.
• Deactivated X-FAN function: After the unit is turned off by pressing the On/Off key,
the unit stops immediately and is completely off.
or , you can adjust the swing angle.
or . An air conditioner that only has the
appears on the screen. The unit will then continue