Klarstein Windwaker Eco Bedienungsanleitung Seite 71

TURBO - Turbo Function
• If you press this button in cooling or heating mode, the unit will cool or heat to
the maximum. The Turbo icon
this button again to exit the turbo function. The turbo icon will disappear from the
screen.
• When you start this function, the fan will run at the highest speed so that the ambient
temperature reaches the temperature set on the unit as quickly as possible.
Arrow Keys
Press the ARROW KEYS to increase or decrease the set temperature by 1 °C (°F). If you
press and hold the buttons for more than 2 seconds, the temperature displayed on the
remote control will change rapidly. Release the button when the desired temperature is
set. The indoor air conditioner adjusts its temperature display accordingly.
Swing Function left/right
If you press this button, you can select the swing angle (left/right). By pressing this key
several times, the swing angle is adjusted as follows:
no display
• If you keep this button pressed for longer than 2 seconds, the unit swings from left to
right and back. As soon as you release the button, the unit stops swinging from left
to right and the current position of the guide grid is maintained.
• If you activate the swing mode and press the button again two seconds later, the
swing mode will stop immediately. If you press the button again within 2 seconds,
the pan status will change depending on the sequence shown above.
Note: This function is only available for some models.
will be displayed on the remote control. Press
EN
71