Intended Use; Product Features; Technical Data - Bosch GCM 8 SJL Professional HEAVY DUTY Originalbetriebsanleitung

Intended use

The power tool is intended as a stationary machine for mak-
ing straight cuts in wood with and against the grain. It is pos-
sible to cut mitre angles of -52° to +60° and bevel angles of
-2° to +47°.
The power tool is designed with sufficient capacity for saw-
ing hardwood and softwood as well as chipboard and fibre-
board.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.

Product features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Slide device
(2) Chip ejector
(3) Transport handle
(4) Adjusting screw of depth stop
(5) Laser protection cap
(6) Roller
(7) Lock-off switch for on/off switch
(8) On/off switch
(9) Handle
(10) Protective guard
(11) Retracting blade guard
(12) Saw blade
(13) Saw table extension
(14) Fence
(15) Adjustable fence
(16) Saw table
(17) Clamping lever of the saw table extension
(18) Scale for mitre angle
(19) Insert plate
(20) Locking clamp
(21) Locking knob for all mitre angles
(22) Mitre detent lever
(23) Tilt protector
(24) Angle indicator for mitre angles
(25) Detents for standard mitre angles

Technical data

Sliding mitre saw
Article number 3 601 M19 161
Rated power input W
No-load speed rpm
Starting current
limitation
Bosch Power Tools
(26)
(27)
(28)
(29)
(30)
(31)
(32)
(33)
(34)
(35)
(36)
(37)
(38)
(39)
(40)
(41)
(42)
(43)
(44)
(45)
(46)
(47)
(48)
(49)
(50)
(51)
(52)
(53)
(54)
(55)
(56)
(57)
(58)
(59)
(60)
A) Accessories shown or described are not included with the
GCM 8 SJL GCM 8 SJL
3 601 M19 1.. 3 601 M19 1C1 3 601 M19 181
1250 1600
5600 5600
● ●
Mounting holes
Recessed handles
Screw clamp
Standard bevel angle stops 45°, 22.5° and 33.9°
Chip deflector
Depth stop
Locking screw for slide device
Hex key (5 mm)
Holes for screw clamp
A)
Length stop
Transport safety lock
Laser warning label
On/off switch for laser (cutting line indication)
Clamping lever for all bevel angles
Scale for bevel angle
Angle indicator for bevel angles
Stop for standard 0° bevel angle
Spindle lock
Hex socket screw for mounting of saw blade
Clamping flange
Interior clamping flange
Locking screw for the adjustable fence
Threaded rod
Laser beam outlet aperture
Screws for insert plate
Locking screw for length stop
Clamping screw for length stop
Set screw for laser position (parallelism)
Screw for bevel angle indicator
Stop screw for 0° bevel angle
Stop screw for 45° bevel angle
Screw for mitre angle indicator
Set screws for mitre angle scale
Hook-and-loop strap
Laser lens cover
product as standard. You can find the complete selection of
accessories in our accessories range.
GCM 8 SJL GCM 8 SJL
3 601 M19 1B1
3 601 M19 1K1
1250 1400
5600 5600
● ●
1 609 92A 4D3 | (30.08.2018)
English | 27
A)
A)
GCM 8 SJL
3 601 M19 141
3 601 M19 1L1
1600
5600
●