Intended Use; Product Features; Technical Data - Bosch GSM 18V-216 Professional HEAVY DUTY Originalbetriebsanleitug

28 | English

Intended Use

The power tool is a stationary machine for cutting in a
straight line with and against the grain in hardwood, soft-
wood, chipboard and fibreboard. It is possible to cut mitre
angles of –47° to +47° and bevel angles of 0° to +45°.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.

Product features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Slide device
A)
(2) Dust bag
(3) Chip ejector
(4) Transport handle
(5) Depth stop adjusting screw
(6) Laser protection cap
(7) Lock-off function for on/off switch
(8) On/off switch
(9) Handle
(10) Protective guard
(11) Retracting blade guard
(12) Guide roller
(13) Fence
(14) Saw table extension
(15) Clamping screw for saw table extension
(16) Assembly holes
(17) Saw table
(18) Insert plate
(19) Locking knob for all mitre angles
(20) Mitre pre-setting lever
(21) Tilt protector
(22) Angle indicator for mitre angles
(23) Detents for standard mitre angles

Technical data

Sliding mitre saw
Article number
A)
No-load speed
Laser type
Laser class
Divergence of laser line
Weight according to EPTA-Procedure
01:2014
Recommended ambient temperature
during charging
1 609 92A 5U3 | (07.10.2020)
(24) Scale for mitre angles
(25) Adjustable fence
(26) Screw clamp
(27) Chip deflector
(28) Stop for standard 45° bevel angle
(29) Stop screw for 45° bevel angle
(30) Depth stop
(31) Clamping handle for all bevel angles
(32) Locking screw for slide device
(33) Spindle lock
(34) Rechargeable battery
(35) Rechargeable battery release button
(36) Transport safety lock
(37) Scale for bevel angles
(38) Angle indicator for bevel angles
(39) Stop screw for 0° bevel angle
(40) Stop for standard 0° bevel angle
(41) Hex key (5 mm)
(42) Hex socket screw for mounting the saw blade
(43) Clamping flange
(44) Saw blade
(45) Inner clamping flange
(46) SDS bolt
(47) Locking screw for the adjustable fence
(48) Threaded rod
(49) Holes for screw clamp
(50) Laser beam outlet aperture
(51) Screws for insert plate
(52) Set screw for laser positioning (parallelism)
(53) Screw for bevel angle indicator
(54) Screw for mitre angle indicator
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
3 601 M41 000
-1
min
nm
mW
mrad (full angle)
kg
°C
Autogoods "130"
GCM 18V-216
3 601 M41 040
4600
650
< 0.39
1M
1.0
B)
15.1−16.1
0 to +35
GCM 18V-216
3 601 M41 0B0
4600
650
< 0.39
1M
1.0
B)
15.1−16.1
0 to +35
Bosch Power Tools