Maintenance/Cleaning - FLORABEST FLG 40 A1 Bedienungsanleitung Und Sicherheitshinweise

FLORABEST FLG 40 A1
6. Add the new charcoal to the charcoal container (4). When you do so, make sure that you do not
overfill the charcoal container (4) so that you can close it again once you have finished.
7. Place the cover (3) onto the charcoal container (4). Place the stainless steel grate (1) down again.
Turn the grate such that the two brackets (2) are aligned with the latches (7). Lock the stainless steel
grate (1).
8. Turn the control dial (9) to the MAX position (clockwise until it stops) to power on the fan. Wait a few
minutes for the new charcoal to kindle and for any smoke to dissipate. You can then continue grilling.

8. Maintenance/cleaning

In order to avoid burning food residues, clean the charcoal barbecue after every use.
Risk of burns!
Wait until the charcoal barbecue is completely cool before cleaning it. Otherwise you could
get burnt.
Warning about property damage
Do not use abrasive or astringent detergents or tools which could scratch the surface (e.g.
metal sponges). These could damage the charcoal barbecue.
1. Loosen both latches (7) and remove the stainless steel grate (1).
2. Remove the charcoal container (4) with its cover (3).
3. Remove the grease collection tray/reflector (6).
4. Clean the stainless steel grate (1) and the grease collection tray/reflector (6) in the sink using
washing-up liquid. You can carefully tap the charcoal container (4) with its cover (3) and clean it
using a brush or dry cloth as needed. Clean the casing (8) and the stand (11) with a slightly damp
cloth.
42 - English