Multiple Mobile Units; Logging On And Logging Off Mobile Units; Logging On Mobile Units; Logging On Other Dect-Gap Telephones To The Base Station - switel D8525 Bedienungsanleitung

9

Multiple mobile units

Up to four handsets can be operated with your base station at any one time.
Note: AUDIOLINE mobile units and also mobile units from other manufacturers can be integrated into the telephone
system by means of the internationally adopted GAP standard. In the same way, you can use an AUDIOLINE mobile
unit on base stations from other manufacturers, as long as these units work using the GAP standard.
When using a number of handsets, you have the following possibilities:
- Internal calls between mobile units.
- External calls can be forwarded between mobile units.
- Incoming external calls are signalled on all mobile units.
Note: If another mobile unit is already using the external line, it will not be possible to make a further external call.
9.1

Logging on and logging off mobile units

9.1.1

Logging on mobile units

1. Press and hold the page button
log on the new mobile unit to the base station within 90 seconds.
2. Press the button on the mobile unit.
3. Select the SETTINGS menu with
4. Select the REGISTER menu with
5. Now enter the PIN code for the base station using the number pad (factory setting 0 0 0 0) and confirm with
.
6. A search will now be carried out for the base station and after a few seconds you will hear a signal tone. The
mobile unit is now logged on and can be used for external and internal calls.
7. An internal number will now have been allocated to the handset. The first handset registered (main handset)
has the internal number 1. Any further handsets that are registered are allocated internal numbers (2 to 5) in
the order of registration. This internal number is shown in the display to the right of the name.
9.1.2

Logging on other DECT-GAP telephones to the base station

In order to log on a DECT-GAP mobile unit from another manufacturer, follow the instructions in the other supplier's
operating manual and then press the
on (factory setting).
- Multiple mobile units -
on the base station for 3 seconds until you hear two signal tones. Now
and and confirm with
and and confirm with
button on the base station for 3 seconds. Use the PIN-Code 0 0 0 0 to log
.
.
103