Fitting Standard Batteries; Charging The Standard Batteries - switel D6010 Bedienungsanleitung

3.4

Fitting standard batteries

To fit the standard rechargeable batteries supplied into
the handset, press on the upper edge of the battery
compartment and slide it downwards. Now insert the
batteries taking care to ensure that the polarity is
correct. Close the battery compartment cover.
Important note: Place the handset in the base station with the display to
the front for at least 16 hours. The telephone may malfunction if the
batteries are not properly charged. The charging light on the base station
will come on.
3.5

Charging the standard batteries

The standard rechargeable batteries for the handset have a stand-by time
of max. 144 hours at room temperature and a maximum talk time of 12
hours. To charge the batteries, place the handset in the base station with
the display to the front.
The current battery capacity is shown in the display.
Full
Note: Exactly like your car battery, the standard rechargeable batteries
are unavoidably subject to a certain ageing. However, you can have an
influence on this ageing process by "training" the standard batteries to a
certain extent. In regular use of the phone, if you cyclically charge and fully
discharge the standard batteries by using the telephone until the
symbol flashes in the display, a demand is placed on the batteries and
they will repay you by giving maximum performance and a long life.
Extended charging and extended discharging on the other hand will both
degrade the capacity and shorten the life of the standard batteries.
- Setting up -
Half full
+
Discharged.
75