Receiving Calls; Making Calls - switel D6010 Bedienungsanleitung

4.2

Receiving calls

When an incoming call arrives, the ringing tone sounds on the handset.
The symbol will flash in the display. Press the call button
handset and the connection will be made. The call will be automatically
taken as soon as you lift the handset from the base station To end the call,
replace the handset in the base station or press the call button
handset.
Important note: If it is not possible to accept a call, the
appear in the display. In this way, you will be able to tell that you have
received a call during your absence. Press the
symbol will go off. If your phone line has the caller display feature (CLID),
then you will have further options. For more information see Chapter 6.
4.3

Making calls

1. Enter the required telephone number with a maximum of 20 digits
using the number pad. The numbers pressed are shown in the
display. If more than 14 digits are pressed, the
left-hand edge of the display will appear and the last 14 digits will be
shown.
2. Press the call button
The call duration in minutes and seconds is shown in the display during
a call. Ten seconds after dialling, the display will switch from showing
the number dialled to showing the duration of the call. The call duration
will still be retained in the display for a few seconds after the call has
been ended.
3. To end the call, press the call button
the base station.
Note: If you have entered a number incorrectly, you can delete the
number by repeatedly pressing the
deleted by pressing the
- Operation -
and the required connection will be made.
button. The number is completely
button for a long time.
symbol will
button twice and the
indicator on the
or replace the handset on
on the
on the
77