Setting The Flash Time; Factory Settings - switel D6010 Bedienungsanleitung

8.4

Setting the flash time

Two different flash times can be set by means of the R-signal button.
PROGRAMMING STEPS
1. Press the
2. Press the
3. Select the required flash
time by pressing the
appropriate button
.
4. Confirm with
entries will be saved.
8.5

Factory settings

You can reset the handset to the factory settings once more by means of
the Factory Settings function.
Ring tone 1
Ringer volume 3
All phone numbers in the caller list, the phonebook and the redial number
will be deleted.
PROGRAMMING STEPS
1. Press the
2. Hold the
pressed until you hear a
signal tone.
88
- Special functions -
button.
button.
or
and the
Receiver volume
medium
Flash time 120ms
button.
button
DISPLAY
Certain symbols will appear.
The current setting will be shown in the
display.
= Flash 120ms
= Flash 300ms
= Flash 120ms
= Flash 300ms
DISPLAY
Certain symbols will appear.
The display will briefly show all
symbols and the factory settings will
be re-established.
Button click on