Ducati MONSTER Anleitung- Und Instandhaltungsheft Seite 84

LCD unit functions
When the ignition key is turned to ON, the instrument
panel carries out a Check of all instruments (pointers,
display, lights) (see fig. 3.1 and 3.2).
LCD (1)
Turn the key to ON and press (A) (fig. 3.2) to display trip
meter and odometer alternatively.
Resetting the trip meter
E
Keep (A) pressed (fig. 3.2) for more than 2 seconds.
When the TRIP function is enabled (trip meter), display
(LCD 1) will reset.
fig. 3.1
LCD (2)
Turn the key to ON and press (B) (fig. 3.2) to display clock
and oil temperature.
Setting the clock
Press (A) for at least 2 seconds.
Press (B) to set AM/PM.
Press (A) to set hours; press (B) repeatedly to set correct
hour.
Press (A) to set minutes.
Press (B) to increase the value. Keep the button pressed
for more than 5 seconds to proceed faster.
Press (A) to quit this function.
1
A B 2
fig. 3.2
12