Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7.10
Setting the display language
The display messages can be set up in German, Italian, Spain, Netherlands, English, French and
Danish/Norwegian/Swedish.
1.
Press the menu button
2.
Select the HANDSET menu with
3.
Select the LANGUAGE function with
4.
Select a language with
5.
Exit the entry mode by holding the
7.11
Setting the FLASH time
1.
Press the menu button
2.
Select the SETUP menu with
3.
Select the RECALL function with
4.
Select the flash time FLASH 1 (90ms) or FLASH 2 (250ms) with
5.
Exit the entry mode by holding the
7.12
Restoring factory settings
The handset and the base station are reset to the factory settings using this function. The phone book, the caller list
(CLID) and all phone numbers in the redial facility will be deleted.
Factory settings:
Language: German
Battery warning tone: On
Range warning: On
Button click: On
Receiver volume: 3
Pin code: 0 0 0 0
Pause: 3 sec.
Dialling method: MV/Tone
1.
Press the menu button
2.
Select the SETUP menu with
3.
Select the DEFAULT function with
4.
Enter the PIN code using the number pad (factory setting 0000) and confirm with
CONFIRM? will appear in the display.
5.
Confirm with the menu button
6.
After a short time, the factory settings will be restored. The display will indicate the ready mode once more.
Note: If you have forgotten the PIN code, you can also restore the factory settings without it.
1.
Remove a battery from the handset.
2.
Hold the
button pressed and replace the battery. Hold the
DEFAULT appears in the display.
3.
Confirm with
button.
78
- Special functions -
.
and
and
and
and confirm with
button pressed.
.
and
and
button pressed.
.
and
and
.
and the factory settings will be restored. You can abort the process by pressing the
and confirm with
and confirm with
/
.
and confirm with
.
and confirm with
Handset name: D6025
Automatic call accept: On
External ring tone: 3
Internal ring tone: 1
Handset ring tone volume: 3
Base ring tone: 2
Base ring tone volume: 3
FLASH time: 90ms
and confirm with
.
and confirm with
button pressed until the message
.
.
.
and
and confirm with
.
. The message
.
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
