List Of Pictograms Used; Introduction; Intended Use; Parts Description - Parkside PHKSAP 20-Li A1 Bedienungs- Und Sicherheitshinweise

List of pictograms used:

Read the instruction manual.
Use in dry indoor rooms only.
Switch the appliance off and remove
the battery pack before replacing
attachments, cleaning and when not
in use.
Protection class II (Double insulation)
Protect the battery pack against heat
and continuous intense sunlight.
COrDLeSS CIrCuLAr SAW 20 V
PHKSAP 20-Li A1

Introduction

Q
We congratulate you on the purchase of your new
product. You have chosen a high quality product.
The instructions for use are part of the product.
They contain important information concerning
safety, use and disposal. Before using the product,
please familiarise yourself with all of the safety
information and instructions for use. Only use
the product as described and for the specified
applications. If you pass the product on to anyone
else, please ensure that you also pass on all the
documentation with it.

Intended use

Q
This cordless circular saw 20 V (hereinafter
"product" or "power tool") is designed for
longitudinal, cross and mitre cuts in firmly
supported solid wood, chip board, plastics and
lightweight construction materials. The product is
to be used by adults. Children under the age of
16 may not use the tool except under supervision.
Any other use or modification of the product
is considered improper use and can result in
hazards such as death, life-threatening injuries and
damage. The manufacturer is not liable for any
damages caused by improper use. The product is
not intended for commercial use or for any other
application.
6 GB / IE / NI
Protect the battery pack against water
and moisture.
Protect the battery pack from fire.
Alternating current
Direct current
Fuse
T3.15A

Parts description

Q
Figure A:
Safety interlock
1
On / off switch
2
Cutting depth scale
3
Battery pack
4
Locking lever
5
Base plate
6
7 Wing screw for rip fence
8 Spindle lock button
9 Hex key
Figure B:
Auxiliary handle
10
LED work light
11
Cutting angle scale
12
Wing screw for cutting angle preselector
13
Rip fence
14
Blade guard
15
Clamping flange
16
Washer
17
Clamping screw
18
Release lever for the blade guard
19
Vacuum outlet for dust extraction
20