Compare Lab And Process Data; Select And Display Laboratory Data - HACH LANGE DR 3800 Bedienungsanleitung

Operation

3.2 Compare lab and process data

3.2.1 Select and display laboratory data

6
To compare process and laboratory data, the necessary measured
values of the sc1000 must be saved on the SD SanDisk card
(Section 3.1 on page 5).
The data log of the DR 3800 will store up to 1000 readings. A
complete record of the analysis is stored, including the Date, Time,
Results, Sample ID and Operator ID.
Note: When the instrument data log is full, the oldest data are automatically
deleted which allows the new data to be stored.
1. Press Recall Data in the Main Menu.
2. Press Data Log in the Recall Data menu.
A list of the stored data is displayed.
3. Press Filter: On/Off.
The Filter Settings function is used to search for the following
specific items:
• Sample ID
• Operator ID
• Start Date and End Date
• Parameter
4. Select On to turn the filter on.