Section 2 Installation; Unpack The Equipment; Installation Of The Software - HACH LANGE DR 3800 Bedienungsanleitung

Zusätzliche software link2sc

Inhaltsverzeichnis

Verfügbare Sprachen

Section 2

Installation

The software LINK2SC comes packaged with the following items:

•

Note: If any of these items are missing or damaged, contact the

manufacturer or a sales representative immediately.

To update the DR 3800 with the new LINK2SC software use the

supplied USB adapter.

1. Plug the external power supply to an electrical outlet.

2. Turn the DR 3800 on by pressing the power switch on the back.

3. Select System Checks in the Main Menu.

4. Press Instrument Update in the System Checks menu.

5. Insert the SD SanDisk card in the USB adapter and connect the

6. Press OK. The link is established automatically and the

7. Press OK to return to the System Checks.

8. Press Main Menu to return to the Main Menu.

SD SanDisk card (storage card) which includes the software

LINK2SC and USB adapter

User manual

USB adapter to the USB interface (type A) on the instrument.

software is updated.

Inhaltsverzeichnis