3.3.3 Additional features
3.3.3.1 Change the design of the graph
2. Set the Lower Limit in the second graph (K+) to 0 mg/L.
Note: Use the alphanumeric keypad to enter the number and press
OK to confirm.
Both parameters are displayed in equal ratio in the resulting
diagram.
Use the following additional features for changing the view of the
displayed graphs and/or to get detailed information of the data:
•
Change the design of the graph
•
Display results as a 24h Average
•
Set control limits
It is possible to display the graphs in different designs.
Change the view of the active graph with the second left lower key
(dot, cross, line). The data are displayed as a line or as dots or
cruxes.
Operation
19