Add Process Data - HACH LANGE DR 3800 Bedienungsanleitung

3.2.3 Add process data

To compare the laboratory data with the process data, add the
process data from the SD SanDisk card to the DR 3800.
1. Insert the SD SanDisk card in the USB adapter and connect the
USB adapter to the USB interface (type A) on the DR 3800
(Refer to Figure 1 on page
2. Press Options and then Add Data.
A list of the parameters (for example NH4D) is displayed.
3. Confirm with OK.
A list of available external data is displayed.
4. Select a file and press OK.
Operation
5).
9