Adjust The Y-Axis To Compare The Results In One Diagram - HACH LANGE DR 3800 Bedienungsanleitung

Operation

3.2.4 Adjust the y-axis to compare the results in one diagram

10
A list of the parameters is displayed.
5. Select a parameter and confirm with OK.
The process data will be added to the display.
Note: For example the results for NH4-N are displayed, but the y-axis is a
part of the active data (in this case of the laboratory data Ammonium).
A black and an orange box are shown in the left upper corner of the
display. The black box relates to the laboratory data and the orange
box relates to the process data.
6. Press the black or orange box to switch between the graphs.
Note: The colors of the displays vary, due to the selected color palettes in
the Select Color menu.
To compare the results in one diagram, adjust the y-axis to the
same range for the two graphs.
Example:
1. Press the orange box to select the graph of the process data.
In this example, the y-axis for the process data ranges from
0–6.