Operation
3.2.5.1 Change the design of the graph
3.2.5.2 Display results as a 24h Average
12
It is possible to display the graphs in different designs.
Change the view of the active graph with the second left lower key
(dot, cross, line). The data are displayed as a line or as dots or
cruxes.
Laboratory data often result from average samples. A more
significant comparison of laboratory data and process data can be
achieved by displaying the data as a 24h Average.
To display data as a 24h Average:
1. Activate the graph that displays the process data.
2. Press Options and then press 24h Average to display a graph
that shows the results as a 24 hour average. The time range is
from 0:00 h–23:59 h.
Note: To display the second graph as a 24h Average, activate the
black/orange box.