Hafele WT 200 Montage- Und Wartungsanleitung Seite 89

Example:
Use of the add-on module for 2 additional relay output ports and 1 additional
analogue/digital input port
Fig. 29: Add-on module – Position of the jumpers when used for 2 relay output ports and 1 additional
analogue/digital input port
If the additional connection options (connection 1–6) are to be used for 2 electric
strikes and 1 door signalling contact, for example, the jumpers must be positioned
as shown in Fig. 29/1.
Assignment of connections 1–6 if the jumpers have been positioned as shown in
Fig. 29/1:
Controller screw Assignment
terminals
1 NO 1 (relay 1 normally open contact)
2 C 1 (or COM 1) (relay 1 central contact)
3 NO 2 (relay 2 normally open contact)
4 C 2 (or COM 2) (relay 2 central contact)
5 IN 4 (INPUT PORT 4)
6 GND
89