Noise/Vibration Information - Protool CSP 85/60 Bedienungsanleitung

Repairs and servicing
Repairs in the warranty and post-warranty periods
are carried out by the servicing workshops listed
in the index of addresses.
Guarantee
Our equipment is under warranty for at least
12 months with regard to material or production
faults in accordance with national legislation. In
the EU countries, the warranty period for ex-
clusively private use is 24 months (an invoice or
delivery note is required as proof of purchase).
Damage resulting from, in particular, normal
wear and tear, overloading, improper handling,
or caused by the user or other damage caused
by not following the operating instructions, or
any fault acknowledged at the time of purchase,
is not covered by the warranty. Complaints will
only be acknowledged if the equipment has not
been dismantled before being sent back to the
suppliers or to an authorised PROTOOL customer
support workshop. Store the operating instruc-
tions, safety notes, spare parts list and proof of
purchase in a safe place. In addition, the manu-
facturer's current warranty conditions apply.
Note
We reserve the right to make changes to the
technical data contained in this information as a
result of ongoing research and development
work.

Noise/vibration information

Noise and vibration levels measured and deter-
mined according to EN 60 745. The typical
A-weighted noise levels of the electric tool are:
Sound pressure level: 95 dB (A);
Sound power level: 108 dB (A).
Use ear protection!
The typical level of hand-arm vibration is less
than 3 m/s .
2
Inaccuracy of measurement K = 3 dB (A).
Product conformity
declaration
We declare with our full responsibility that this
product complies with the requirements of the
following standards and regulations:
EN 55 014-1, EN 55 014-2, EN 60 745-1,
EN 60 745-2-5, EN 61 000-3-2, EN 61 000-3-3
according to the provisions of the directives
98/37/EC, 2004/108/EC.
����������������
������������������������
������������
�����������
������������������
��