Initial Settings Menu; Initial Settings; Dolby Digital Out - Yamaha DRX-730 Bedienungsanleitung

Chapter 10: Initial Settings
This chapter explains the Initial Settings menu.

Initial Settings menu

The Initial Settings menu contains digital audio
output, video, language, display, and other settings.
When a menu item is grayed out, it means that it
cannot currently be changed. The Initial Settings
cannot be changed during disc playback. You must
stop playback first.
1
Select the DVD input source, and then press
SETUP.
The Setup menu appears on-screen.
Note:
• The Initial Settings menu is available only when
the DVD input source is selected.
2
Select "Initial Settings," and then press ENTER.
The Initial Settings menu appears on-screen.

Initial Settings

Digital Audio Out Digital Out
Video Output

Dolby Digital Out

Language DTS Out
Display 96 kHz PCM Out
Options MPEG Out
3
Use the cursor buttons ( / / / ) and
ENTER to select and change the settings.
The settings are explained below.
Notes:
• The HDMI Resolution and HDMI Color settings
only need to be changed if you've connected an
HDMI component to the HDMI jack.
• The Component Out and AV Connector Out
(Europe model) settings cannot be changed if
you've connected an HDMI component to the
HDMI jack.
• The Component Out and AV Connector Out
(Europe model) settings may change
automatically due to the HDMI Resolution and
HDMI Color settings.
• While HDMI Audio is set to on (see page 13), or a
component is connected to the HDMI jack, only
the Digital Out setting is available.
• When HDMI Audio is set to on (see page 13),
96 kHz PCM is downsampled to 48 kHz
regardless of the 96 kHz PCM Out setting.
56
En
■ Digital Out
Turns the OPTICAL DIGITAL OUT on and off.
■ Dolby Digital Out
Turns Dolby Digital to PCM conversion on and off. If
you've connected the OPTICAL DIGITAL OUT to
your AV receiver/decoder and it doesn't support
Dolby Digital, select Dolby Digital > PCM.
■ DTS Out
Turns DTS to PCM conversion on and off. If you've
connected the OPTICAL DIGITAL OUT to your AV
receiver/decoder and it doesn't support DTS, select
DTS > PCM.
On
Dolby Digital
DTS
96kHz > 48kHz
Notes:
MPEG > PCM
■ 96 kHz PCM Out
Turns 96 kHz downsampling on and off. If you've
connected the OPTICAL DIGITAL OUT to your AV
receiver/decoder and it supports 96 kHz PCM, select
96 kHz.
■ MPEG Out
Turns MPEG to PCM conversion on and off. If you've
connected the OPTICAL DIGITAL OUT to an AV
receiver/decoder that supports MPEG, select MPEG.
Digital Audio Out settings
• On (default): OPTICAL DIGITAL OUT is on.
• Off: OPTICAL DIGITAL OUT is off.
• Dolby Digital (default): Dolby Digital signals are
output as they are.
• Dolby Digital > PCM: Dolby Digital signals are
converted and output as 2-channel PCM.
• DTS (default): DTS signals are output as they are.
• DTS > PCM: DTS signals are converted and
output as 2-channel PCM.
• If you select DTS and your AV receiver/decoder
doesn't support DTS, noise may be heard.
• When DTS > PCM is selected, you can also
choose the type of DTS downmix (see "DTS
Downmix" on page 59).
• 96 kHz > 48 kHz (default): 96 kHz PCM digital
audio signals are downsampled and output at
48 kHz.
• 96 kHz: 96 kHz PCM digital audio signals are
output as they are.
• MPEG: MPEG signals are output as they are.
• MPEG > PCM (default): MPEG signals are
converted and output as 2-channel PCM.