Operation - Cameo QUAD COLOUR LED PAR LIGHT Serie Bedienungsanleitung

OPERATION:

OPERATION:
STATIC COLOUR
This mode offers the ability to separately adjust the intensity for each of the 4
LED groups (R, G, B, W) and to generate an unlimited number of different colours
(colour mixing).
Press the MODE button several times if necessary to select the "Static Colour"
(CXXX) mode. Confirm with ENTER. (2nd digit flashes) and then use the UP and
DOWN buttons to select the desired colour or strobe mode. C1 = Red, C2 = Green,
C3 = Blue, C4 = White and CF = strobe effect).
Press the ENTER button again (3rd and 4th digits flash) and now you can adjust
the brightness of the previously selected colour from 00 to 99 (CX00 - CX99)
using the UP and DOWN buttons and the speed of the strobe (CF00 = strobe effect
deactivated, CF01 = approx. 1 Hz, CF99 = approx. 20 Hz). Confirm with ENTER.
For example:
If you set C1, C2, C3 and C4 to "00", all LEDs in the QUAD PAR projector are off
(blackout).
If you set C1 to "99" and C2, C3 and C4 to "00", then the projector emits 100%
red.
Red
Green
Blue
White
Strobe effect
10
Brightness C100 - C199
Brightness C200 - C299
Brightness C300 - C399
Brightness C400 - C499
Speed CF00 - CF99