Faults - WIKA GDM-100-TI Betriebsanleitung

5. Commissioning, operation / 6. Faults
5.4 Switch point setting
The switch points have a fixed setting as standard and cannot be adjusted. Thus, an
undesired adjustment of the switch points is excluded.
With customer-specific, adjustable switch points, with the accompanying adjustment
key, the desired set point can be set via the adjustment lock in the window.

6. Faults

CAUTION!
Physical injuries and damage to property and the environment
If faults cannot be eliminated by means of the listed measures, the instru-
ment must be taken out of operation immediately.
▶
Ensure that pressure or signal is no longer present and protect against
accidental commissioning.
▶
Contact the manufacturer.
▶
If a return is needed, please follow the instructions given in chapter 9.2
"Return".
For contact details see chapter 1 "General information" or the back page
of the operating instructions.
WIKA operating instructions, models GDM-100-TI, GDM-100-TA
EN
17