NSK Ti-Max Z45L Bedienungsanleitung Seite 7

CAUTION
· Do not exceed the bur speed recommended by the bur manufacturer.
· Do not exceed maximum bur length recommended by the handpiece manufacturer.
· Do not apply excess pressure to the bur as it may break or bend or become difficult to remove.
· DO NOT use burs with problems listed below as the bur may break or disengage from the chuck.
- Bent, deformed, anisomerous (worn), rusted, broken, deficient bur.
- Bur which is cracked on the edge or axis.
- Non-ISO standard, or tampered bur.
5. Switching coolant water shape
It is possible to change the shape of coolant water flow.
Turn the switching valve with an attached wrench to switch the coolant water type.
6