NSK Ti-Max Z45L Bedienungsanleitung Seite 10

7-2 Cleaning ( Optic )
Wipe clean the Glass Rod tip with an alcohol-immersed cotton swab. Remove all debris and oil.(Fig.4)
CAUTION
Do not use a sharp tool to clean the Glass Rod. It could damage the glass and reduce the light
transmission.
7-3 Lubrication
NSK PANA SPRAY Plus
Apply NSK PANA SPRAY Plus every time after each use and/or before autoclaving.
1) Remove the bur from the handpiece.
2) Insert the Spray Nozzle into the spray can port.
Cotton Swab
Glass Rod
Fig. 4
E-Type Spray Nozzle
Handpiece
Fig. 5
9