Preparation For Dmr Operation; Overview; Requesting A Dmr Radio Id; Digital Contacts - Radioddity GD-73E Benutzerhandbuch

English user manual - Radioddity GD-73

Preparation for DMR operation

Overview

 Apply for and receive your DMR ID
 Enter your Digital Contacts, consisting of Talkgroups (TG) and private ID
contacts
 Set up your Digital RX Group Lists
 Program in your Channels, and attach a Digital Contact for TX and attach a
Digital RX Group List for RX to each channel.
 Program your Zones by attaching Channels to each zone.
 (Optional) Set up a Scan List, and attach these Scan Lists to those Channels
you wish to scan

Requesting a DMR radio ID

To work in a DMR network, you must register for a DMR ID number. For amateur radio
this can be https://www.radioid.net/ or https://register.ham-digital.org/ depending on
where you live. Normally, new DMR IDs will be issued within 24 hours.
Once you have your DMR-ID issued, that can now be stored with CPS in the code
plug. Click on "Edit""General Settings"
Note
Never operate the radio with an ID that has not been assigned to you. In amateur
radio networks this can lead to the loss of your license.

Digital contacts

Up to 1024 digital contacts can be stored. These digital contacts are used for storing
talkgroups (TG) as well as individual stations DMR ID numbers. Select "Edit"
"Digital Contacts" to edit the digital contacts.
v1.0
Page 42 of 56