Emergency Alarm Followed By Voice Call - Radioddity GD-73E Benutzerhandbuch

English user manual - Radioddity GD-73
2. The display will alternately show your own ID and "emergency call". The status
LED lights red and the emergency mode is activated.
3. When an emergency alarm is received, the emergency sound is heard. The
received emergency alarm is shown on the display. If there is no response
from other radios after several retries, a beep sounds and the emergency
mode is ended.
4. The radio will exit emergency mode and return to normal display. If the radio is
completely disabled for the playback of beeps, voice or text will not be output
in emergency mode.

Emergency alarm followed by voice call

This feature allows you to send an emergency alarm to another radio. After confirming
the call, both radios can communicate with a voice call via the previously defined radio
channel
1. Press the function key that has been programmed for 'emergency call' function
to send an emergency alarm (function key 1, 2 or 3).
2. The display will alternately show your own ID and "emergency call". The status
LED lights red and the emergency mode is activated.
3. When an emergency alarm is received, the emergency sound is heard. The
received emergency alarm is shown on the display. If there is no response
from other radios after several retries, a beep sounds and the emergency
mode is ended.
4. Hold the radio vertically, about 2.5 to 5cm from your mouth
5. Now press the PTT button to make the voice call. The status LED lights up red.
The radio is in emergency mode. You can talk now. The display shows the
group call icon.
6. Release the PTT button to return to receive mode. The status LED lights up
green if the emergency call is answered.
7. If the Channel Free Indication Tone feature is enabled, you will hear a short
beep as soon as the radio channel is free in order to make further
transmissions.
8. If necessary, press the PTT button again to acknowledge the emergency
alarm call. The status LED lights up red or press the corresponding function
key to switch off the emergency mode.
9. The radio will exit emergency mode and return to normal display. If the radio is
completely disabled in the playback of beeps, voice or text will not be output in
emergency mode until you press PTT to initiate a call. If the radio has been
programmed for "call permit", no beeps or special displays will be shown on
the display of the person called. A special display only appears on the display
when the PTT button is used to trigger or answer a call.
v1.0
Page 18 of 56