Initiating A Call; Group Call; Private Call - Radioddity GD-73E Benutzerhandbuch

English user manual - Radioddity GD-73

Initiating a call

You can select the channel, the DMR ID or the desired group (Talk Group, TG) with
the following options:
 Channel selection keys
 Preprogramed keys
 Contacts
 Manual entry (only for a private call)

Group call

All radios that you wish to communicate with must be on the same group.
1. Select the desired channel using the
names with a name that associates with the Talk Group is useful to facilitate this.
2. Hold the radio vertically, about 2.5 to 5cm from your mouth
3. Now press the PTT key to transmit. The status LED lights up red. The group name
appears on the display
4. Once finished speaking, release the PTT button to return to receive. If a response
is not heard within a predetermined time, the call is terminated.
5. When the call is answered, you will see the status LED light up green.
6. On the display you will see:
 in the top line "Group"
 in the middle line the DMR-ID of the caller
 in the bottom line 'Calling' is displayed, followed by 'end call' if the channel
was not previously active.
7. If the Channel Free Indication Tone feature is enabled, you will hear a short beep
as soon as the transmission has finished.
8. When the group call is over, the display changes back to the previous display.
9. A group call can also be initiated from the contacts.

Private call

1. Using the and
 
2. Hold the radio vertically, about 2.5 to 5cm from your mouth
3. Now press the PTT key to transmit. The status LED lights up red.
4. The display will show:
 in the top line 'Single Call'
 in the middle line the name of the contact you are calling
 in the bottom line the DMR ID of the radio you are calling
5. Once finished speaking, release the PTT button to return to receive. If a response
is not heard within a predetermined time, the call is terminated.
answered, the status LED will light up green.
6. If the Channel Free Indication Tone feature is enabled, you will hear a short beep
as soon as the radio channel is free in order to make further responses.
7. The end of a private call is signalled by an audible short tone.
The two function keys can be programmed as shortcut keys.
and

to select your desired channel.
buttons. Programming channel

If the call is
Page 15 of 56
v1.0