Receiving Emergency Alarms; Answering An Emergency Alarm; Send An Emergency Alarm - Radioddity GD-73E Benutzerhandbuch

English user manual - Radioddity GD-73
The radio supports three emergency alarms:
 Emergency alarm
 Emergency alarm followed by call
 Emergency alarm with automatic activation of microphone

Receiving emergency alarms

1. When receiving an emergency alarm, the number of emergency alarms received
so far as well as the ID of the caller and "Alarm" will be shown on the display. In
addition, the emergency alarm and the name / ID of the caller are displayed
alternately.
2. A beep will sound and the status LED will turn red.
3. If enabled, the radio automatically receives an emergency alarm. If the radio
receives an emergency alarm, the display will show an alarm icon. This will be
displayed until the alarm has been confirmed. As long as the alarm symbol is
displayed, reception of other stations is not possible.
Note
A short press of the ESC
power off key clears the emergency alarm, thereby ending the emergency mode.

Answering an emergency alarm

After receiving an emergency alarm:
1. Press any key to acknowledge the audible alarm tone.
2. Hold the radio vertically, about 2.5 to 5cm from your mouth
3. If the Channel Free Indication Tone feature is enabled, you will hear a short
beep as soon as the radio channel is free
4. Then press the PTT button to respond to the emergency alarm. The status
LED is now red and the radio is in emergency mode. You can talk now.
5. Release the PTT button to return to receive mode. The status LED lights up
green if the emergency call is answered. The display shows "Group Call", the
group ID and the ID of the caller.
6. A short press of the
turn off the emergency alarm clears the emergency alarm and also terminates
the emergency mode.
7. The radio will exit emergency mode and return to normal display.

Send an emergency alarm

This feature allows the sending of an emergency alarm. This is not a voice
transmission but any receiving radio will see the alarm being transmitted and will need
to confirm the alarm for further action. An emergency alarm can only be sent by an
emergency alarm contact in the appropriate emergency group.
1. Press the function key that has been programmed for 'emergency alarm'
function to send an emergency alarm (function key 1, 2 or 3).
key, followed by pressing the programmed emergency mode
ESC key, followed by pressing the programmed button to
v1.0
Page 17 of 56