The Main Display; Chapter 3. Basic Operation - Radioddity FS-T2 Benutzerhandbuch

The main display

Icon Description
Transmit and receive indicator
Battery power indicator
SCAN When the scan is on
DCS
DCS enabled
07
Icon Description
Channel indicator
CTCSS/DCS tone indicator
VOX VOX enabled
CT
CT enabled
Volume level indicator
Chapter 3 – Basic operation
Quick Start Guide
1. Install battery in radio body until it clicks (be gentle!)
2. After install the battery, the radio will turn on automatically.
3. Select your desired channel, press the PTT and talk!
Channel Switch
number (the big number in the middle of the screen) starts flashing.
Press [UP] or [DOWN] to select the channel.
to the standby mode, you can also wait for 8 seconds and it will be saved automatically.
08