Transfer The Codeplug To The Radio - Radioddity GD-73E Benutzerhandbuch

English user manual - Radioddity GD-73
1. First give the zone a meaningful name (1), such as the identification of the
repeaters whose channels you want to store in the zone.
2. Then select from the list of available radio channels (2) all those you want to
bundle in that zone.
3. Click the "Add" button (3) to accept each channel.
4. The added channels will then be listed in the right window (4) under the
heading "Members".
That is all what is required.

Transfer the codeplug to the radio

After completing all the above steps, you can transfer the data from your PC to the
GD-73. Click on "Program""Write Data"
v1.0
Page 47 of 56