Herunterladen Inhalt Inhalt Diese Seite drucken

General Settings; Zone - Radioddity GD-73E Benutzerhandbuch

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

English user manual - Radioddity GD-73
In the function menu:
1. Press the
MENU
to select the "Settings" sub-menu and confirm your selection by pressing the
MENU
button.
2. Use the
and
selection by pressing the
3. Use the
and
selection by pressing the
4. Then use the
audible code on reception) and "TX Type" (for setting sub audible code on
transmission) and confirm the selection as usual with the
5. Alternatively, select one of the remaining two options "RX Code" and "TX
Code" to select the corresponding sub audible code for the reception or
transmission.
Note
CTCSS and DCS are functions that prevent the squelch from opening if the
transmitter and receiver CTCSS / DCS settings do not match. These must be the
same in the radios that wish to inter-communicate. If these are not set in your radio,
you will hear all other transmissions on the frequency, including those that have set
these functions.
CTCSS and DCS do not give users any degree of secrecy or
privacy of communications.

General settings

In addition to the channel-related settings, there are also various settings that apply
across channels. These are described below.

Zone

A zone is a collection or group of channels. They may be grouped any way you wish,
for example a zone for each geographic area, or a zone with different talk groups for
one repeater, or any other way you find useful or convenient.
In the function menu:
1. Press the
MENU
to select the "Settings" sub-menu and confirm your selection by pressing the
MENU
button.
2. Use the
and
selection by pressing the
3. Then use the
selection as usual with the
4. Finally press
ESC
about 10 seconds.
key to enter the function menu, then use the
buttons to select the sub-menu "Channel" and confirm
MENU
button again.
buttons to select the option "SubCode" and confirm
MENU
button again.
and
keys to select between "RX Type" (for setting sub
key to enter the function menu, then use the
buttons to select the sub-menu "Zone" and confirm
MENU
button again.
and
keys to select your desired zone and confirm the
MENU
key.
button several times to return to the main display, or wait
v1.0
or
buttons
MENU
key.
or
buttons
Page 32 of 56

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Gd-73aGd-73

Inhaltsverzeichnis