Receiving And Answering A Private Call; Receiving A Private Call; Answering A Private Call; All Call Feature - Radioddity GD-73E Benutzerhandbuch

English user manual - Radioddity GD-73
3. Once finished speaking, release the PTT key to return to receive
4. If a response is not heard within a predetermined time, the call is terminated.

Receiving and answering a private call

A private call (also known as a single call) is an individual call to a specific remote
station. The remote station waits for the call and the calling party initiates it.

Receiving a private call

1. The status LED lights up green
2. The display shows:
 in the middle line "single call"
 in the bottom line the DMR-ID of the caller as well as the symbol for an
incoming call (digital mode only) is displayed.

Answering a private call

1. Hold the radio vertically, about 2.5 to 5cm from your mouth
2. If the Channel Free Indication Tone feature is enabled, you will hear a short beep
as soon as the radio channel is free in order to answer the call.
3. Now press the PTT key to answer the call. The status LED lights up red. You can
talk now.
4. Once finished speaking, release the PTT key to return to receive

All call feature

All calls are used to send important information to everyone on the channel,
regardless of the group they may have selected.

Receiving an all call

1. The status LED lights up green
2. The display shows:
 on the first line 'All Call'
 on the middle line, the ID of the caller is seen
 on the bottom line, 'All Call' is displayed only for analogue mode calls
3. When the All Call has finished, the display returns to the previous display.
4. If the Channel Free Indication Tone feature is enabled, you will hear a short beep
as soon as the transmission has finished.
5. Answering an All Call is not possible.
Note
If the channel is changed during reception of an All Call, reception of the All Call is
aborted. During an All Call, the programmed keys have no function.
v1.0
Page 14 of 56