Menu Operation; Contacts; Group Call Contacts - Radioddity GD-73E Benutzerhandbuch

English user manual - Radioddity GD-73

Menu operation

Press the MENU
1.
through the sub-menus using the
Press the MENU
2.
Press the ESC
3.
are in the top menu, you can return to the normal display output (frequency,
channel) by pressing the

Contacts

The contacts stored in the radio make up the address book of your radio. Each
individual contact corresponds to a name or an ID to which a targeted call can be
established. Each entry is assigned an additional property such as "Group Call",
"Individual Call" or "General Call". Each contact consists of the following three
elements:
1. Name Name of your contact
2. ID DMR ID number of your contact
3. Type Type of contact; group, private or all call
Note
You can only edit the contacts with the CPS software on PC. Editing directly on the
GD-73 is not possible because it does not have the necessary buttons.

Group call contacts

1. Press the MENU
to select the "contacts" sub-menu
2. Use the and

3. Confirm your selection by pressing the
4. Use the and

5. The display of your GD-73 will then show "selected!"
6. Hold the radio vertically, about 2.5 to 5cm from your mouth
7. Now press the PTT button to start the call. The status LED lights up red. The
display shows the group name or group ID and the outgoing group call icon
8. Release the PTT button to return to receive.
9. When the call is answered, the status LED lights up green.
10. The display will show:
a. in the first line "Group Call",
b. in the middle row the name of the call group (Call Group Alias) and
c. in the bottom line the ID of the answering person as well as the icon for
an incoming call (only in digital mode)
11. If the Channel Free Indication Tone feature is enabled, you will hear a short
beep as soon as the radio channel is free in order to make further
transmissions.
button to get to the function menu. You can then scroll
(up) and

button again to select the sub-menu item.
key to key to return to the higher-level menu. As soon as you
ESC key again.
key to enter the function menu, then use the
buttons to select the desired group contact

buttons to select the sub-menu 'select'.

(down) keys.

MENU button again
v1.0
or buttons
 
Page 20 of 56