Reset To Factory Settings; Programming The Gd-73; Introduction - Radioddity GD-73E Benutzerhandbuch

English user manual - Radioddity GD-73
In the function menu:
1. Press the MENU
to select the "Settings" sub-menu and confirm your selection by pressing the
MENU button.
2. Use the and

selection by pressing the
3. Now use the

long (LP) or short (SP) key press and confirm the selection by pressing the
MENU button again.
 SP_P1 indicates a short key press of the P1 key
 SP_P2 indicates a short key press of the P2 key
 LP_P1 indicates a long key press of the P1 key
 LP_P2 indicates a long key press of the P2 key
4. Use the and

assign it, and press
5. Finally press ESC
about 10 seconds.

Reset to factory settings

If you ever need to reset the radio back to factory settings, follow this procedure.
In the function menu:
1. Press the MENU
to select the "Settings" sub-menu and confirm your selection by pressing the
MENU button.
2. Use the and

selection by pressing the
3. If you confirm the "Factory Reset?" prompt now displayed with a press of the
MENU button, the GD-73 will reset and all memories and settings will be lost.
4. If you instead press the
settings.

Programming the GD-73

Introduction

The GD-73 is a UHF radio with digital DMR (true tier I and II) as well as analogue FM.
It offers a total of 1024 channels (analogue and digital), arranged in up to 64 zones.
Each zone can accommodate a maximum of 16 channels each. In addition, up to
1024 contacts with the CPS can be stored on the radio.
The following pages are designed to help you understand all aspects of radio
programming and setup to get the most out of your device.
key to enter the function menu, then use the
buttons to select the sub-menu "Hotkeys" and confirm

MENU button again.
and buttons to select corresponding key "P1" or "P2" and

keys to select the required function from the above list to

MENU to confirm the selection.
button several times to return to the main display, or wait
key to enter the function menu, then use the
buttons to select the sub-menu "Default" and confirm

MENU button again.
ESC key, the radio will not reset to factory default
v1.0
or buttons
 
or buttons
 
Page 36 of 56