Gude DHH 1050/10 TP Originalbetriebsanleitung Seite 9

hereby declare the conception and construction of the below-
mentioned appliances correspond - at the type of construction
being launched - to appropriate basic safety and hygienic
requirements of EC Directives.
In case of any change to the appliance not discussed
with us the Declaration expires.
Marking of appliances: DHH 1050/10 TP WOOD SPLITTER
Order No. 02003
Date/producer signature:
Signed by:
Technische Dokumentation:
Appropriate EU Directives:
2004/108/EG
2006/95/EG
2006/42/EG
Harmonised standards used:
EN 609-1/A2:2009
EN 61000-3-3:1995+A1+A2
EN 61000-3-2:2006
EN 55014-2:1997+A1
EN 55014-1:2006
Reference Number:
Z1A 10 06 46850 059
Noise level:
Lwa: 85,2 dB
Lpa: 69,9 dB
Certification place:
TÜV SÜD Product Service GmbH, Ridlerstrasse 65, DE-80339
München
Guarantee
The guarantee relates exclusively to faults caused by material
defect or manufacturing defect.
Original proof of purchase with the purchase date needs to be
attached for claims in the guarantee period.
The guarantee does not cover any unauthorised use such as
appliance overloading, violent use, damage by third party or
foreign items. The failure to follow the Operating Instructions
and assembly instructions and ordinary wear and tear is not
included in the guarantee.
Safety instructions
General
For safety reasons it is necessary to respect and follow safety
instructions specified in these Operating Instructions and
instructions on the appliance relating to appliance operation,
maintenance and repairs.
Operating staff
Using the wood splitter can be associated with some
risks. Therefore only trained and experienced persons can
handle the appliance and work with it. The operating staff
must wear tight, close-fitting clothing and protective
shoes.
Workplace
To ensure safe wood splitting, it is necessary that the
workplace is flat and enables stability keeping and sufficient
free moving. All obstacles need to be removed from access
paths when bringing the splitter and taking it away. Sufficient
workplace lighting must be ensured.
Make sure no persons are present in the workplace
during appliance operation or make sure they keep a
sufficient safe distance.
Work preparation
Current supply needs to be interrupted by pressing the red
button on the switch and disconnecting the plug at any repairs
or maintenance work and when leaving the wood splitter.
Interrupting the current supply by putting the switch to
15.07.2010
Managing Director
Mr. Arnold
J. Bürkle FBL; QS
OFF position is not sufficient. GÜDE wood splitters are
fundamentally supplied with hardened splitting knives.
However, if you detect any slight deformation of the knife edge
after splitting wood containing any invisible foreign particles,
e.g. out of concrete, steel, etc. then remove it by a file or
grinding off. Keeping the splitting knife permanently sharp
increases the working output.
TIP: Occasionally grease the splitting knife with fat (for
problem wood).
The function of safety equipment (especially the two-
lever operation) needs to be checked before the splitter is
put into operation for the first time.
ATTENTION! Make sure the splitting table is safely
secured to the splitter before the splitter is put into
operation.
Technical data
Connector:
Engine power:
Engine revolutions:
Max. splitting force:
Max. splitting lift:
Forward feed rate:
Backward feed rate:
Hydraulic oil tank:
Table adjustment:
Max. diameter of split wood:
Splitting pillar:
Table dimensions:
Weight:
Order No.
Disposal
The disposal instructions are based on icons placed on the
appliance or its package. The description of their meaning can
be found in the "Marking on the appliance" chapter.
Operating staff requirements
The operating staff must carefully read the Operating
Instructions before using the appliance.
Qualification
Apart from the detailed instruction by a professional no special
qualification is necessary for using the appliance.
Minimum age
Only persons over 18 years of age can work with the
appliance.
An exception includes youngsters if they work within their
professional education the purpose of which is to obtain
knowledge supervised by a trainer.
Maintenance and treatment (pic. 2)
Always keep the wood splitter clean.
Grease the splitting pillar with fat before each use – this
will increase the life of slide jaws. Use only original spare
parts when changing the constructional elements. Regularly
check tightness and firmness at hydraulic hoses and hose
couplings.
Attention:
- Fill in oil only when the splitter pillar is in an inserted
position
- Regularly grease the splitting pillar and splitting knife
with multipurpose fat (pic. 2/A)
9
400 V~50 Hz
4000 W P1 / S6 40%
1400 revolutions a
minute
10 tons
510 mm
0,045 m/s
0,18 m/s
5 l (oil type - HLP 46)
1050 mm
App. 400 mm
120 mm x 120 mm
App. 380 x 300 mm
146 kg
02003