Gude DHH 1050/10 TP Originalbetriebsanleitung Seite 8

GB
Please read carefully the following Operating Instructions before putting the appliance into operation
A.V. 2 Any reprints, even partial, are subject to approval. Technical changes reserved.
Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions?
We will quickly help you and without needless bureaucracy at our home page www.guede.com in the Service part. Please help us be able to
help you. In order to be able to identify your appliance in case of claim, we need the serial No., Order No. and year of production. All this data
GB
can be found on the type label. Please enter the data below for future reference.
Serial No.:
Tel.: +49 (0) 79 04 / 700-360
Marking on the appliance
Explanation of symbols
The following symbols are used in these Operating Instructions
and/or on the appliance:
Product safety:
Product corresponds to
appropriate standards of the EU
Prohibitions:
General prohibition
(in connection with another icon)
Pull the plug prohibited
Warning:
Warning/attention
Keep a sufficient safe distance!
Warning! Flying parts!
Commands:
Read the Operating Instructions
before use
Use safety gloves
Environment protection:
Dispose waste professionally so
as not to harm the environment.
Any damaged and/or disposed
electric or electronic devices must
be delivered to appropriate
collection centres.
Illustrative pictures! Translation of original operating instructions.
Order No.:
Fax:
Gently stick prohibited
Protect from rain and moisture
Warning! Tripping hazard!
Warning! Risk of getting jammed!
Use protective glasses and
earphones!
Use safety shoes!
Packing cardboard material may
be delivered to collecting centres
for recycling.
Year of production:
+49 (0) 79 04 / 700-51999
Package:
Protect against humidity
Careful – fragile
Technical data:
Connector
Max gap diameter
Gap pressure
Appliance description (pic. 1)
1. Handle
2. Splitting knife
3. Clamping plate
4. Service arm
5. Handle covering
6. Table holder (in front)
7. Table blocking
8. Splitter table
9. Wheels
10. Switch / plug
11. Lift adjusting rod
12. Motor
13. protection system
14. switching rocker (bottom panel)
15. metal butt strap
Appliance
DHH 1050/10 TP WOOD SPLITTER
Robust design, splitting knife out of special steel, all steel parts
with high-quality powder coating, high-quality hydraulic pump.
Engine with overheating fuse.
EU Declaration of Conformity
We,
Güde GmbH & Co. KG
Birkichstraße 6
74549 Wolpertshausen
Germany
8
E-Mail: support@ts.guede.com
This side up
Engine power
Max Timber length
Weight