Backlight Setting; Recording Input Setup: Recording From An External Device (7880 Only); Timer Setup - Philips 7780 Instruction For Use

(6) Press the PLAY button to save your setting and then the STOP/
MENU button to exit Menu mode.

6) Backlight Setting

(1) With the Voice Tracer in Stop mode, press
the STOP/MENU button for a few moments
(Figure 13-1).
(2) Press the NEXT button briefly 5 times (Fig-
ure 18-1).
(3) Press the PLAY button briefly.
(4) "LIGHT" is shown and "OF" blinks on the
display (Figure 18-2).
(5) Press the NEXT button to select "OF" (off) or "ON"
(Figure 18-3).
(6) Press the PLAY button to save your setting and then the
STOP/MENU button to exit Menu mode.
7) Recording Input Setup: Recording From an External
Device (7880 only)
® This function is only available in voice fold-
ers.
(1) With the Voice Tracer in Stop mode, press
the STOP/MENU button for a few moments
(Figure 13-1).
(2) Press the NEXT button briefly 6 times (Fig-
ure 19-1).
(3) Press the PLAY button briefly. "INPUT" is
shown and "V" blinks on the display (Figure 19-2).
(4) Press the NEXT button to select "L" (line-in) or "V"
(voice) (Figure 19-3).
(5) Press the PLAY button to save your setting and then the
STOP/MENU button to exit Menu mode.
(1) With the Voice Tracer in Stop mode, press the STOP/MENU button
(2) Press the NEXT button repeatedly until "CLOCK" is
(3) Press the PLAY button briefly.
(4) The default system date is shown, "01" for the day and
Figure 18-1 Figure 18-2
(5) Press the NEXT button to set the desired year and then
(6) The month will now blink "01". Press the NEXT button
(7) The day will now blink "01". Press the NEXT button to
Figure 18-3
(8) The time will now blink. Set the time in the same man-
(9) After you set the minutes, press the PLAY button to save
® The clock will begin to run as soon as you save your
Figure 19-1 Figure 19-2
(1) With the Voice Tracer in Stop mode, press the STOP/MENU button
(2) Press the NEXT button repeatedly until "TIMER" is shown on the
(3) Press the PLAY button briefly.
(4) "OF" (timer setup off) blinks on the display (Figure 20-2).
Figure 19-3
(5) Press the NEXT button to select "ON" (timer setup).
8) Clock Set Mode
for a few moments (Figure 13-1).
shown on the display (Figure 7-1).
month, and "05" for the year (Figure 7-2).
press the PLAY button.
to select the desired month and press the PLAY button.
select the desired day and press the PLAY button.
ner as you set the date, using the NEXT and BACK but-
tons to select the desired values (Figure 7-3).
your settings and then the STOP/MENU button to exit
Menu mode.
time setting.

9) Timer Setup

for a few moments (Figure 13-1).
display (Figure 20-1).
Figure 7-1
Figure 7-2
Figure 7-3