Fig. 6.6: Menu For Screenshots; Fig. 6.7: Save/Load Menu; Fig. 6.8: Menu With The Settings For Screenshots; Fig. 6.9: Defining File Names - Hameg HMS 3000 Handbuch

S t o r e a n d r e c a l l i n s t r u m e n t s e t t i n g s
6.3 Screenshots
The most important method of storing for documentation
purposes is the screen photo. At least one USB stick must be
connected, only then will any settings regarding the destination
and the format be possible. Push the keys SAVE/RECALL and
SCREENSHOTS for opening the appropriate menu.

Fig. 6.6: Menu for screenshots

Also in this menu the destination (according to the USB sticks
connected) can be selected with the top menu key. When this
is done the first time, the data manager will appear in order
to either select or generate a destination listing. After the
entry of this information, the SCREENSHOTS storing menu
will reappear. The second menu item FILE NAME allows you to
enter a name with the respective name entry menu which will
open automatically upon selecting this menu item. If FORMAT
is selected with the respective menu key, these formats will
be offered and can be selected with the universal knob: BMP
= Windows Bitmap (uncompressed format) and GIF. Pushing
the key next to SAVE will store the actual screen display along
with the name and format at the destination selected.
48
Subject to change without notice
S c r e e n s h o t e x a m p l e
In order to store data you have to define the kind of data and the
destination. First attach a USB stick (refer to 9.1 USB connector)
to the front panel connector. Press SAVE/RECALL in order to call
the respective menu.

Fig. 6.7: Save/Load menu

Select the kind of data by pressing the respective soft key (in this
example SCREENSHOTS) in order to access the settings menu.

Fig. 6.8: Menu with the settings for screenshots

Please verify that the USB connector into which you plugged the
USB stick (front or rear) is written in the top softmenu (you can
Fig. 6.9: Defining file names