Charging Current; 12 V: Slow Charging; Jump Start Function; Safety Functions - AEG LT60 Bedienungsanleitung

30 www.aeg-automotive.com
Jump Start mode
If the connected battery has less than 14.7 V, first a
charging process will automatically be used before
the device switches to Jump start mode�
When pressing and holding the button
3 seconds the charger will directly switch to Jump
start mode without charging�
cHarGInG
cUrrenT
12 V/5 A and 24 V/20 A: Intended Use
To charge low and medium capacity batteries
(12 V/24 V) (e�g� lorries or tractors)�
12 V/60 A and 24 V/20 A: Intended Use
for charging high capacity batteries (e�g� marine
or large deep-cycle batteries) or to quick-charge
medium or higher capacity batteries�
Jump Start: Intended Use
Helps start vehicles and equipment with a weak
battery�

12 V: slow charging

Charging voltage
Model
(V)
LT60 12 V
24 V: slow charging
Charging voltage
Model
(V)
LT60
24 V

Jump start function

Charging voltage
Model
(V)
LT60
12 V
safeTy
fUncTIons
(27) for
The charger features the following safety features
to prevent damage to the charger and the battery
or the vehicle:
•
short circuit (defective battery),
•
incorrect connection (connected with reversed
polarity),
•
overheating
•
excess current
•
overcharging

Charging current

(A)
5 a / 20 a / 60 a
rMs
Charging current
(A)
2 a / 10 a / 20 a
rMs
Charging current
(A)
540 a