Safety - Mettler Toledo O2 ISM Bedienungsanleitung

O ISM Qualification Kit
2
1

Safety

This instruction manual lists the main points of how to use the
O ISM Qualification Kit, from METTLER TOLEDO for best results and
2
in the intended manner.
This instruction manual, and the safety requirements in particular,
must be observed by the operator and all other persons working
with this equipment.
The instruction manual must always be stored close at hand, in a
place accessible to all people working with an ISM O
the O
2
Warning notices and symbols
This instruction manual identifies safety instructions and additional
information by means of the following symbols:
This symbol draws attention to safety instructions and warnings of
potential danger which, if neglected, could result in injury to per-
sons and/or damage to property.
This symbol identifies additional information and instructions
which, if neglected, could lead to defects, inefficient operation and
possible loss of product.
Intended use
The O
2
testing of the ISM transmitter family, respectively, as described in
this instruction manual.
The O
2
of METTLER TOLEDO ISM sensors, as described in this instruction
manual.
Any other use, or use not mentioned here, that is incompatible with
the technical specifications is deemed inappropriate. The operator is
solely responsible for any damage arising from such use.
© 05/15 Mettler-Toledo AG, Greifensee
Printed in Switzerland
ISM Qualification Kit.
ISM Qualification Kit is intended solely for validating and
ISM Qualification Kit is intended for simulating the functions
sensor and
2
O ISM Qualification Kit
2
52 300 440
5