Disposal And Recycling; Troubleshooting Guide - Scheppach SC40P Originalbetriebsanleitung

5. Clean the cooling fins of the cylinder and the hous-
ing.
Be sure to clean the entire machine to protect the
6.
paint.
Store the machine in a well-ventilated place.
7.
Preparing the device for transport
1. Drain the petrol tank using a petrol extraction
pump.
Always let the engine run until it has used up the
2.
remainder of petrol in the tank.
Empty the engine oil from the warm engine.
3.
4. Remove the spark plug boot from the spark plug.
5. Clean the cooling fins of the cylinder and the hous-
ing.
Remove the push bars if necessary. Ensure that
6.
the cables are not kinked.

Troubleshooting guide

Fault Possible causes
Motor does not start
a) Engine brake lever not pressed
b) Spark plug defective
c) Fuel tank empty
d) Petrol cock closed
Engine performance a) Soil is too firm
drops
b) Housing clogged
c) Roller badly worn
Imprecise scarifying result a) roller worn
b) Wrong working depth
Motor is running, roller is a) Toothed belt is torn
not rotating
20 GB

Disposal and recycling

The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in this
packaging can be reused or recycled. The equipment
and its accessories are made of various types of mate-
rial, such as metal and plastic. Defective components
must be disposed of as special waste. Ask your dealer
or your local council.
Rectification
a) Press the engine brake lever
b) Replace spark plug
c) Top up fuel
d) Open petrol cock
a) Change working depth
b) Clean housing
c) Replace roller
a) Replace roller
b) Correct working depth
a) By customer service workshop