TechniSat TECHNISTAR K4 ISIO Kurzanleitung Seite 171

Fault
Cannot receive channels that were
previously being received
Time not displayed while in
standby mode
Text in e.g. Info box or SFIplus
detailed information is hard to
read at a distance
USB device not recognized
Device automatically switches o
after a certain time
PC cannot connect
to receiver; receiver cannot
connect to network
DVR recording
no longer possible
42
Possible cause
Channel moved elsewhere
Channel no longer being broadcast
Time not acquired
Standby is switched o
Character size set to "small"
USB device formatted for wrong
le system
Auto Standby function enabled
Wrong network settings
Network cable connected
incorrectly
Selected storage medium is full
Solution
Perform a search/scan
None
Let e.g. ZDF run for approx.
30 sec
Switch on standby clock
Adjust character size
Format USB device for FAT32
le format
Auto Standby setting - check and
deactivate if necessary.
Check network settings
Check network connection
Delete existing
recording(s)
Attach and con gure
other storage medium.