TechniSat TECHNISTAR K4 ISIO Kurzanleitung Seite 158

If the block ed channel involves an encrypted broadcaster, please also refer to Section 8.5.3 in the
operating manual.
8.3.5 Returning to last channel selected
> Pr ess the Back button on the remote control to return to the last channel selected.
> Pr ess the button again to return to the channel you were previously watching.
8.3.6 Switching between TV/radio
> Use the TV/Radio button to switch between TV and radio mode.
The unit switches to the last radio channel listened to.
Alternatively, you can also switch between TV and radio mode by pushing the NAV button.
To do this also note the setting for OSD Radio/Music in the operating manual.
8.3.7 Info box
For the duration set in the menu > OSD, an Info box appears on the screen for the set period every time you
change channels.
This Info box displays the location and name of the selected channel, the title of the current program and
the currently active channel list.
The progress bars are colored yellow according to the amount of transmission time already expired for
the current program. If the beginning of the progress bar is colored red the transmission started too
early, and if the end of the progress bar is colored red the current program has overrun.
Additional program properties are also displayed:
For example:
for video text
for 4:3 broadcasts
for encrypted channels
for Dolby Digital broadcasts
for subtitles
for HbbTV
The current time is shown in the upper right-hand corner of the screen.
8.4 Receiving encrypted channels
> Ins ert the CONAX Smartcard into the card slot in the integrated card reader, (gold-colored chip facing
down, and in the direction of insertion).
or
> Ins ert a CI / CI+ module into the slot.
> Ins ert the Smartcard into the CI / CI+ module card slot. Ensure that the gold-colored chip on the
Smartcard is facing upwards, in the direction in which the card is inserted.
W hen so doing also note the corresponding section in the operating manual.
8.5 Volume control
You have the option of adjusting the volume on your digital receiver. This facilitates operation of the receiver,
as it means you can access all the major functions on a single remote control, and will only rarely have to
resort to using the remote control for the TV.
29