TechniSat TECHNISTAR K4 ISIO Kurzanleitung Seite 172

Fault
Cannot delete DVR recordings
DVR recording not displayed
Receiver cannot be operated, nor
switched on or o
Possiblecause
File system on storage medium is
damaged
Selected storage medium is not
attached.
Defective data stream --> receiver
blocked
Solution
Check storage medium
Connect select storage medium
Correct storage medium setting
Hold down the On/Standby but
ton on the receiver or the remote
control for approx. 5 seconds.
Disconnect mains plug for approx.
5 seconds, then reconnect receiver
Perform ash reset:
Caution!
All personal settings will be lost in
the process.
> Remove DC plug from receiver
> Press and hold the Standby
and the up arrow keys at the
same time.
> With the Standby and the up
arrow keys pressed down ,
re-insert the mains adapter
> Keep buttons pressed down
for approx. 5 sec. then
release. " FLAS " appears in
the display.
-
43