TechniSat TECHNISTAR K4 ISIO Kurzanleitung Seite 136

3 Important notice
Dear customer,
This quick start manual describes the most important connection options and basic operation steps to enable
you to quickly start using the TechniStar K4 ISIO.
You will nd a detailed operating manual on the enclosed CD-ROM.
If you are unable to read this detailed operating manual, you can request a printed version of the operating
manual from TechniSat free of charge.
There are many additional functions described in the full operating manual that are not covered in this quick
start manual. There is also a great deal of additional information about individual functions and settings
in the full operating manual, which provides a more detailed explanation of the available options and the
purpose of the settings and functions.
4 Remote control
4.1 Changing the battery
> Open the c over on the battery compartment to the rear of the remote control by pushing it in the
direction of the arrow and then lifting it o .
> Ins ert the supplied batteries, ensuring that the poles are the right way around (indicator visible in
battery compartment).
> Close the battery compartment again.
4.2 Remote control code
By changing the remote control option, it is possible to use this remote control to operate a TechniSat
television and two TechniSat receivers using the same coding.
> Hold do wn the remote control code
button as often as necessary until the LED for the desired remote control option (
ashes brie y.
The currently set remote control code will be displayed, as the appropriate LED ashes, while pressing
the button.
button to change the remote control option and press the OK
TV , SAT1 or SAT2 )
7