TechniSat TECHNISTAR K4 ISIO Kurzanleitung Seite 152

7.4.3 Entering numbers
> Use the numeric key pad
value or
Note the number of digits used in the entry as there must always be the same number used. This
means that if a ve-digit value is required, for example "10600", but you only wish to set a four-digit
value, for example "9750", then you must enter a "0" at the beginning for every unused position.
Therefore, in this example, it would be necessary to enter "09750".
7.4.4 Virtual keyboard
If is shown on the right next to the set value, the value can be changed using the selection list. You have
three di erent keyboard options when using this data entry method.
You can switch the keyboard layout between the so-called QWERTY keyboard and the alphabetic keyboard,
while an SMS keyboard can also be used at any time.
The functionality of the QWERTY keyboard is identical to that of the alphabetic keyboard. They only di er in
terms of the arrangement of the various letters, numbers, characters and symbols.
> Pr ess the OK button to open the virtual keyboard.
The keyboard now appears in alphabetic form.
> Pr ess the Option button to toggle between the QWERTY keyboard and the alphabetic keyboard.
to enter the new setting you require if a question mark
is displayed in the highlight.
or a numeric
23