TechniSat TECHNISTAR K4 ISIO Kurzanleitung Seite 139

5.4.2 Analog
f Connect the digital receiver
Hi-Fi ampli er.
(e.g. CD or AUX; attention - the phono input is not suitable!)
5.5 USB port
The USB port is used for updating the operating software and for viewing images / playing music and lms.
The USB port is used for updating the operating software and transferring data. You can also use the MPEG,
MP3 or JPG playback functions to access MPEG, MP3 or JPG les on the USB storage device. You can also
plug a WLAN dongle, e.g, the TechniSat TELTRONIC ISIO TC USB-WLAN adapter (item no. 0004/3633), into
the USB port in order to connect the receiver to your existing WLAN network. When doing so please also
note the point on WLAN settings in the operating manual.
5.6 Network port (RJ45)
You can use the network port to connect the receiver to your existing network. If your network has
g
connection to the Internet, you can receive your provider's IPTV programs, use the HbbTV applications
from the program provider and establish the connection to the Internet.
Ensure that the points in Network Settings as well as the information on data protection in the operating
instructions are observed.
10
audio R and audio L cinch port using a suitable cable to an input on your